This vacuum pump has a suction capacity of 100 m3/h and a final vacuum pressure of either 40mbar(a) or 0.7mbar(a).

MV series vacuum pumps are oil-bath loop lubricated and have a 3 phase electric motor.

These pumps are driven by a standard electric motor coupled together via an elastic drive joint. A centrifugal fan, splined to the pump shaft, assures a proper airflow for the best cooling of the pump unit (surface forced cooling).

A big tank for the oil recovery, installed on the pump outlet, with built-in oil condensate trap, reduces noise and eliminates smoke.

The oil contained in the system carries out the function of lubrication, cooling and sealing between the rotating and the fixed parts of the pump.

On the suction inlet, the check valve is integral part of the pump as a standard, while upon request, a suitable filter can be supplied to stop possible impurities reaching the pump.

All MV series pumps can be prepared for installing a gas ballast valve (upon request), which allows a high compatibility to steam.

Thanks to the above mentioned devices, as well as to a compact and sturdy construction, MV series of pumps are particularly suitable to operate on continuous duty and under very heavy conditions.

Technical Data Sheet