spacer

Search results for "PA100"

Pneumatic suction pumps PA

Pneumatic suction pumps PA

A state of the art range of ejectors has allowed creating this range of pneumatic suction pumps featuring an excellent ratio between the amount of consumed air and sucked air, as well as the ability to adjust the vacuum level and capacity according to the supply air pressure.
These pumps are supplied by compressed air with a pressure ranging from 1 to 6 bar (g), and they can produce a maximum vacuum of 90% and a suction capacity between 15 and 320 cum/h, measured at a normal atmospheric pressure of 1013 mbar.
When designing these pumps our attention was focused on noise. In fact, they are perfectly soundproofed and there are no moving parts subject to wear and vibrations. All this results in an extremely silent operation.
Moreover, being based on the Venturi principle, they do not develop heat.
As a standard, they are equipped with a filter/pressure reducer unit for the supply air and a filter with microporous cartridge located on the suction inlet connection which can keep the finest dust and impurities.
The excellent compressed air and sucked filtration allows blowing air free from oil vapours, water condensation and impurities in the work environment, causing no pollution.
The use of light alloys for making these pumps has allowed a considerable reduction of their weight thus allowing them to be directly installed onto the machine. Thanks to their static operating principle, maintenance is reduced to a simple regular cleaning of the filters.
Product codes: PA40 PA70 PA100

File CAD su TraceParts
10.05  
torna in cima
Combined pneumatic suction pumps PA and blowing pumps PS

Combined pneumatic suction pumps PA and blowing pumps PS

All the pneumatic suction and blowing pumps previously described can be combined regardless of their suction or blowing flow rate.Given the enormous number of possible combinations, for space reasons, this catalogue only describes combinations of pumps with the same size.
Product codes: PA40PS40 PA40PS70 PA40PS100 PA70PS40 PA70PS70 PA70PS100 PA100PS40 PA100PS70 PA100PS100

File CAD su TraceParts
10.15  
torna in cima