spacer

Search results for "plunger valve"

Mini vacuum cup holders with plunger valve

Mini vacuum cup holders with plunger valve

They share the same mechanical features at the other mini vacuum cup holders.
Their distinctive feature is the plunger valve solidly connected to a conical spear valve, which activates suction, and therefore creates vacuum, only when the cup comes into contact with the load to be lifted.
Product codes: 201260 201560 201860 202060 202260 202560 203060 203560 204060

File CAD su TraceParts
torna in cima
Mini vacuum cup holders with plunger valve and built-in bush

Mini vacuum cup holders with plunger valve and built-in bush

The technical and mechanical features are the same as for the mini vacuum cup holders with plunger valve described on the previous pages. Their distinctive feature is their threaded hexagonal bush, which allows them to be directly assembled to the vacuum manifold, thus saving time and eliminating pipes and fittings.
Product codes: 201265 201565 201865 202065 202265 202565 203065 203565 204065

File CAD su TraceParts
torna in cima
Mini vacuum cup holders with plunger valve with no springing

Mini vacuum cup holders with plunger valve with no springing

They have the same function as the mini vacuum cup holders with plunger valve but, for further bulk reduction, the cushioning spring, the threaded pipe with nuts for fixing to the automation and the quick coupler have been removed.
This type of cup holder is to be directly assembled to the vacuum manifold. To allow quick assembly, its end is provided with a threaded male shank.
Product codes: 201261 201561 201861 202061 202261 202561 203061 203561 204061

File CAD su TraceParts
torna in cima
Basic vacuum cup holders with plunger valve

Basic vacuum cup holders with plunger valve

They offer the same mechanical performance at the basic mini vacuum cup holders. They are characterised by a plunger valve solidly connected to a conical spear valve, which activates suction, and therefore creates vacuum, only when the cup comes into contact with the load to be lifted.
The actual springing stroke is:
- For height C= 28 mm 16 mm
- For height C= 65 mm 49 mm
- For height C= 95 mm 74 mm
Product codes: 034510 036010 036515 038020 038510 038515 0311010

File CAD su TraceParts
torna in cima
Basic vacuum cup holders with plunger valve, with no springing

Basic vacuum cup holders with plunger valve, with no springing

Their function is the same as the previously described basic vacuum cup holders with plunger valve but, for further bulk reduction, the cushioning spring, the threaded bush with nuts for fixing to the automation and the quick coupler have been removed. This type of cup holder must be assembled onto the vacuum manifold by means of a threaded male shank on its end.
Product codes: 034511 036011 036516 038021 038511 038516 0311011 035041 037541 0310041

File CAD su TraceParts
torna in cima
Special vacuum cup holders with plunger valve

Special vacuum cup holders with plunger valve

They share the same mechanical features at the special vacuum cup holders. The addition of a plunger valve solidly connected to a conical spear valve, which activates suction, and therefore creates vacuum, only when the cup comes into contact with the load to be lifted.
With these cup holders, it is no longer necessary to install cocks on the suction hoses; for this reason, they are recommended in all those cases in which there is a chance that not all the cups come into contact with the load to be lifted (because of an uneven or incomplete load).
The actual springing stroke is:
- For height C= 55 mm 37 mm
- For height C= 110 mm 84 mm
Product codes: 068520 068522 0611020 0611022 0615020

File CAD su TraceParts
torna in cima
Plunger valves

Plunger valves

Plunger valves are composed of a cylindrical brass body, a steel plunger with a conical valve and a thrust spring.
Connected to vacuum, they are normally closed.
They activate suction, thus creating vacuum, only when the plunger is in contact with the gripping surface.
They are available in various versions, all suitable for our vacuum cups.
Product codes: 190110 190111 190112 190210 190310 190410

File CAD su TraceParts
4.03  
torna in cima
Mechanically operated valves

Mechanically operated valves

These valves are composed of an anodised aluminium body, a steel pin solidly connected to a conical shutter and of a thrust spring.
Connected to vacuum, they are normally closed.
They activate suction, thus creating vacuum, only when the pin is activated by the cams or any other mechanical device.
They can be used as an alternative to plunger valves when these cannot be assembled onto the vacuum cups.
Product code: 190230

File CAD su TraceParts
4.04  
torna in cima